Professional Adhesive Glue Board for UV Fly Traps – 60 cm: Complete Hygiene and Effectiveness

This adhesive glue board is the vital component in any flying insect control system.

Designed specifically to fit 60 cm UV fly trap devices, it excels at attracting and immobilizing flying insects of all sizes, ensuring a healthy, insect-free environment quickly and without the need for harmful chemical pesticides.

Technical Specifications

• Material: Heavy-duty coated cardboard (moisture-resistant).
• Adhesive: Non-drying pressure-sensitive adhesive with high holding power — non-toxic and odorless.
• Design:
  • Front: Features a grid or reference marks for easy monitoring and counting of insects (for health surveillance/HACCP purposes).
  • Back: Features an easy-peel paper liner protecting the adhesive surface to keep it fresh and effective until use.
• Compatibility: Compatible with 60 cm UV fly trap devices.

Product Features

1. Clean, Attractive Appearance: Thanks to its black color (revealed after removing the protective liner), trapped insects are not clearly visible, making the trap discreet and ideal for customer-facing areas.
2. Complete Containment: Fully contains insects inside the trap, preventing insect parts (such as wings or legs) from falling into the work environment or onto food (critically important for kitchens and factories).
3. High Safety: Completely free from toxic chemicals or insecticides, making it safe for use in food preparation areas and hospitals.
4. Extended Effectiveness: Features a "non-drying" adhesive formula that retains its sticking power for extended periods (typically 30 to 60 days depending on environmental conditions).
5. Easy Monitoring: The grid or lines on the board help food safety officers count and identify insects — essential for HACCP and ISO compliance.
6. Easy Installation: The board installs in seconds.

How to Use

• Switch Off: Turn off the UV fly trap device and disconnect it from the power supply for safety.
• Remove Old Board: Pull out the full adhesive board and dispose of it in the bin.
• Prepare New Board: Take the new board and remove the protective paper from the adhesive side.
• Install: Slide the board into the designated channel inside the UV trap so that the adhesive side (with the grid) faces the UV light source.
• Activate: Ensure the board is firmly in place, then switch the UV trap back on.

Additional Tips

• Replacement Frequency: It is recommended to replace the adhesive board regularly every 3–5 weeks, or as soon as it is full of insects, to ensure continued maximum effectiveness.
• Storage: Store in a cool, dry place away from direct sunlight to prevent the adhesive from losing effectiveness before use.