Professional Sticky Sheet for 45cm UV Insect Light Traps – Complete Cleanliness and Effectiveness

This sticky sheet is the vital component in the flying insect control system.

Designed specifically to fit 45cm UV insect light trap devices, it is distinguished by its superior ability to attract and hold flying insects of various sizes, ensuring a hygienically insect-free environment quickly without the need for harmful chemical pesticides.

Technical Specifications

• Material Type: High-durability treated cardboard (moisture-resistant).
• Adhesive: Non-drying glue material (Pressure-sensitive adhesive) with high holding strength, non-toxic, and odorless.
• Design:
  • Front: Contains a grid or identification marks (Grid) to facilitate insect counting and type assessment operations (for health monitoring/HACCP purposes).
  • Back: Contains an easy-to-remove paper protection layer covering the adhesive material to ensure it remains fresh and effective until the moment of use.
• Compatibility: Compatible with 45cm UV light traps.

Product Features

1. Aesthetic and Clean Appearance: Thanks to the black color (after removing the protection layer), trapped insects are not clearly visible, making the trap inconspicuous and very suitable for customer-facing areas.
2. Complete Cleanliness: Works to fully contain insects inside the trap, preventing insect parts (such as wings or legs) from falling into the work environment or above food (very important for kitchens and factories).
3. High Safety: Completely free of toxic chemicals or insecticides, making it safe for use in food preparation areas and hospitals.
4. Extended Effectiveness: Features a "dry-resistant" glue formula, maintaining its adhesive power for long periods (usually 30 to 60 days depending on environmental conditions).
5. Easy Monitoring: The lines or grid on the front of the sheet help food safety officers count insects and identify their types, which is essential in HACCP and ISO systems.
6. Easy Installation: The sheet is installed in seconds.

Usage Method

• Turn Off: Turn off the UV light trap device and disconnect it from the power source to ensure safety.
• Remove Old Sheet: Pull out the full sticky sheet and dispose of it in the trash.
• Prepare New Sheet: Take out the new sheet and remove the protective paper from the adhesive side.
• Installation: Insert the sheet into its designated slot inside the UV light trap so that the adhesive side (with grid) faces the UV light source.
• Activation: Ensure the sheet is secure in its place, then restart the UV light trap.

Additional Tips

• Change Rate: It is recommended to change the sticky sheet periodically every 3–5 weeks, or immediately when the sheet is full of insects, to ensure continued maximum effectiveness.
• Storage: Keep in a cool, dry place away from direct sunlight to ensure the glue's effectiveness is not affected before use.